Geomembrane Welding Machine Plastic Membrane 32~842°F Hot Wedge Welder Tool Kit, for Sealing Welding PVC EVA PE HDPE PP

geomembrane welding machine, 10cm overlap width hot wedge welding machine, 0.5-5m/min automatic plastic welding tool,product parameters:for geotextile coating and sealing machinewelding speed: 0.5-5m/minheating temperature: 0～450℃.welding material thickness: 0.2-1.5mmwelding width: 12.5mm*2pcs, inner cavity 12mmjoint strength ≥ 85% of the parent material (tensile strength in shear direction)overlap width: 10cminsulation grade: class iiset contents include:1 x geomembrane welding machine1 suitcaseprecautions:1. for correct operation, please read these instructions carefully.2. use a 3-wire grounded power cord and plug (a socket with a capacity of 10a. on the corresponding welding machine, the phase is connected to the live wire, the n phase is connected to the neutral wire, and the phase = is connected to the ground to achieve protection purposes).3. to ensure the quality of welding, please designate a dedicated person to operate.

• 【Geomembrane welding machine】This welding machine is widely used and can be used to weld various soluble plastic materials such as PP, PVC, HDPE, ECB, EVA, PE, ABS, etc. -Permeation applications such as membranes, geotextiles, waterproof boards, drainage boards, composite membranes, etc.
• 【Working principle】The motor drives the upper and lower pressure rollers to rotate through the reducer and chain. The sliding bracket drives the hot wedge and inserts it between the two substrates, while the lever compresses the pressure roller and joins the two molten substrates.
• 【Technical parameters】Voltage: 110V/220V; frequency: 50Hz; power: 800W; welding speed: 0.5-5m/min; heating temperature: 0-450 degrees; welding material thickness: 0.2mm-1.5mm; overlap width: 100 mm; welding width: 12.5mm×2, inner cavity 12mm; seam strength: >85% of the substrate (tensile strength in shear direction), whole machine; weight: 5 kg; insulation grade: II grade.
• 【Double pressure wheel】This machine is equipped with two pressure wheels, which are resistant to high temperatures and have a soft and firm welding effect. The pressure can be adjusted according to the film thickness. The silicone pressure wheel is suitable for PE and EVA 0.2-1.5mm; the steel pressure wheel is suitable for 1-2mm PVC.
• 【Operation rules】Since the welding quality is directly related to the speed and temperature adjustment during operation, the welding machine should be specified by the staff to achieve excellent quality and high efficiency.